Dual Bands Wi-Fi 6 Wireless LAN•Equipped with a powerful Dual-Core 1.3GHz Processor for efficient wireless network.
•Dual Band Concurrent Performance: Up to 3000 Mbps bandwidth across 2.4G and 5GHz radios, providing 2400Mbps/160MHz for 5GHz and 574Mbps for 2.4GHz.
•Powerful Wi-Fi 6 with OFDMA, BSS Coloring, Downlink/Uplink Multiple Input Multiple Output (MU-MIMO) and TWT, provides high speed, high capacity, less interference, optimizing network efficiency and performance.
•Wi-Fi 6(802.11ax) WLAN backward compatible Wi-Fi 5/4 (11ac/n)
•Dual Gigabit Ethernet ports in Gateway/Router mode for WLAN/LAN to Eth-WAN routing
Wireless AP Features Summary•Multiple SSID Support: Up to 4 SSIDs for both 2.4GHz and 5.8GHz bands.
•SSID Hiding: Hide SSIDs for added security.
•VLAN Setting for Virtual AP SSID.
•Wireless Repeater Mode extends Wi-Fi coverage without needing cables, allowing client devices to roam quickly across repeater APs.
•Wireless Client Isolation to improve wireless stability by isolating clients
•5G Prioritization: Enhances Ethernet performance on the 5GHz band.
•Wireless Security: Supports Open, WPA, WPA2 PSK (TKIP/AES), WPA2 EAP, and WPA3 encryption for user data security
•Wi-Fi Time Scheduling to save energy.
•Adjustable RF Power based on the environment.
•User Limitation: Maximum of 64 users per band.
|
Management Features•Supports Gateway, AP Repeater modes.
•DHCP Server service in Gateway mode
•NAT Routing, DMZ and MAC/IP/URL Filtering in gateway mode
•DHCP or PPPoE client for internet WAN access
•Configuration Backup and Restore: Options to back up and restore settings.
•Factory Reset: Ability to reset to factory defaults through web
•Periodic Device Reboot by Day/Hours
•Admin Management: Modify admin password, perform firmware upgrades, configuration backup/restore and access system logs.
•Management Interfaces: Supports GUI web management, AC controller management*.
Weatherproof, Built-in Antenna for light Industrial Applications•WAC835-OMN built-in 2x5dbi 2.4G+2x6dbi 5GHz omni-antenna for wide-range installation.
•WAC835-DSA built-in 4x8dbi 120° Directional Sector Antenna for extended long-wide coverage
•Improved Coverage: 120° coverage effectively serves larger urban and open spaces, supports more simultaneous connections in busy areas.
•20K Anti-Surge protection for Ethernet connectivity
•Easy installation & Simplified Maintenance: The built-in antenna design simplifies installation and reduces maintenance costs
•Weatherproof and -20°C to 55°C opeating temperature, providing durable and cost-effective soltion for light industrial and outdoor environments
|
WAC835G-OMN | WAC835G-DSA
The WAC835G series is a high-performance, dual-band Wi-Fi 6 (802.11ax) Access Point providing seamless wireless connectivity, with speeds up to 574 Mbps on 2.4GHz and 2402 Mbps on 5GHz (total up to 3000 Mbps). The WAC835G-OMN has omni-directional antennas for 100m coverage, while the WAC835G-DSA offers 120° directional sector antennas for extended 200m outdoor reach. Both models support wall/pole mounting without needing external antennas and 802.3af PoE power input. The AP and Repeater modes, roaming, multiple SSIDs, user-friendly setup wizard, and optional AC Controller management are flexible for different use cases. In gateway mode, they support NAT, DMZ, and IP/MAC/URL filtering, making them ideal for light industrial environments such as warehouses, factories, parks, and outdoor areas.
Dual Band Dual Concurrent 3000Mbps:
• IEEE 802.11ax, compatible with 802.11ac/n/g/b/a
• Dual Band Dual Concurrent (DBDC) 2.4G+5GHz radio, up to 574Mbps + 2400Mbps @160MHz Bandwidth
• Failsafe in either 2.4GHz or 5GHz Radio failed
Max. PHY Rate:
• 802.11ax 5GHz is 2.77 times than 802.11ac, 2.4GHz is 1.91 times than 802.11n.
• 802.11ax 5GHz+2.4GHz DBDC is 2.5 times than 5GHz 802.11ac + 2.4GHz 802.11n DBDC.
OFDMA
OFDMA is applied in Wi-Fi 6 (IEEE 802.11ax). It is a user access technology that allows spectrum to be simultaneously allocated to multiple users or devices, enabling the transmission of multiple data streams on the same frequency band, thereby enhancing network efficiency. It can also be adjusted according to demand or priority, achieving more flexible network resource management. By dividing the spectrum into small subcarriers, OFDMA can also reduce interference between adjacent users, making the signal more reliable and stable. This is one of the latest key technologies in Wi-Fi 6.
BSS Coloring
BSS Coloring is a feature introduced in the 802.11ax Wi-Fi standard, which helps reduce interference from neighboring Access Points (APs) and improves coexistence between multiple APs.The basic idea behind BSS Coloring is that each BSS or AP is assigned a unique color, which is added to the preamble of each transmitted data packet. When a client device receives a packet, it can check the color of the received preamble and use this information to differentiate signals from different APs.
BSS Coloring helps prevent unnecessary retransmissions and conflicts caused by neighboring networks, thereby improving overall network efficiency and potentially extending the available range of IoT devices.
Downlink & Uplink MU-MIMO
In Wi-Fi 6, MU-MIMO technology has been further developed to communicate simultaneously with multiple devices in both the Downlink and Uplink directions.This means that whether sending data from the access point to devices or from devices to the access point, multiple device data streams can be processed simultaneously. This enables faster and more reliable wireless connections, while also improving network throughput and efficiency..
WPA3 Data Encryption
• WPA3 (Wi-Fi Protected Access 3) is a latest standard used to protect Wi-Fi network security, and it's also implemented in Wi-Fi 6 networks.
• WPA3 adopts advanced encryption algorithms such as Simultaneous Authentication of Equals (SAE) to replace the Pre-Shared Key (PSK) mode used in WPA2, thus resisting password cracking and dictionary attacks.
• WPA3 also includes some improved security configurations and protocols to enhance network security and protection levels, providing a more secure Wi-Fi network protection.
Built-in 2.4G+5GHz dual band omni-antenna or 120 directional secor antenna
• WAC835-OMN built-in 2x5dbi 2.4G+2x6dBi 5GHz omni-antenna for wide-range installation.
• WAC835-DSA built-in 4x8dbi 120° Directional Sector Antenna for extended long-wide coverage
• Improved Coverage: 120° coverage effectively serves larger urban and open spaces, supports more simultaneous connections in busy areas.
• Easy installation & Simplified Maintenance: The built-in antenna design simplifies installation and reduces maintenance costs
• Waterproof and -20°C to 55°C opeating temperature, providing durable and cost-effective soltion for light industrial and outdoor environments
Waterproof, Built-in Antenna for light Industrial Applications
• IP66 Waterproof level protection
• Waterproof and -20°C to 55°C opeating temperature, providing durable and cost-effective soltion for light industrial and outdoor environments
• 20K Lightning Surge protection board for Ethernet ports are added, greatly enhance the protection capability of the equipment.
• Easy installation & Simplified Maintenance: The built-in antenna design simplifies installation and reduces maintenance costs
Network Mode
• AP mode (Default): The AP wireless interface and Ethernet interface are bridging together. Users get IP from company’s DHCP server or AP Controller.
• Bridge the LAN/WLAN to the uplink network, ex: company network, private WLAN network.
• Gateway mode: The device is supposed to connect to internet via ADSL/Cable Modem. The AP acts as DHCP server and assign IP for connected clients.
• Gateway mode provides NAT Routing, DMZ and IP/MAC/URL filtering.
• Gateway mode provides NAT Routing, DMZ and IP/MAC/URL filtering.
Wireless Repeater Mode
• Wireless Repeater Mode: Wireless Repeater Mode allows an access point (AP) to extend the range of an existing Wi-Fi network by retransmitting the signal to cover a larger area. A repeater AP connects wirelessly to the primary AP or another repeater AP, boosting Wi-Fi coverage without needing a physical Ethernet connection. The primary AP means the AP with an uplink Ethernet connection to the office network or Internet.
• How Multiple Repeater APs Work with Client Device Roaming: When multiple repeater APs are set up, they create a mesh-like network, all sharing the same Repeater SSID (network name) and password for internal communication among the APs. The Repeater SSID is typically hidden from client devices and is only used for back-end communication between the repeaters and the primary AP, ensuring stable signal transfer.
Client devices(ex: smartphones, laptops, AGV) connect using a different SSID configured on the APs.
As they move across areas, the devices automatically switch to the nearest repeater AP with the
strongest signal. The APs manage this handoff by continuously assessing signal strength, enabling
seamless roaming without requiring the client to reconnect.
Wireless Client Isolation
• Virtual AP: Allows a single access point to broadcast multiple SSIDs, creating separate virtual networks with distinct settings and security policies, like guest and internal networks.
• Wireless Isolation: Restricts communication between devices on the same SSID, enhancing privacy and security—especially useful for public or guest networks.
3-Step Setup Wizard in Web GUI
• Configure LAN IP Address mode (DHCP in Gateway mode)
• Configure 2.4G Wi-Fi Setup: SSID, Channel, Encrypt type & password, periodic reboot
• Configure 5G Wi-Fi Setup: SSID, Channel, Encrypt type & password, periodic reboot
• Configure 5G Wi-Fi Setup: SSID, Channel, Encrypt type & password, periodic reboot
| Technology | |
| Standard |
IEEE 802.11ax wireless local area network (WLAN), Backward support 802.11ac/n/g/b/a Wireless LAN |
| IEEE 802.3 10Base-T Ethernet | |
| IEEE 802.3u 100Base-TX Fast Ethernet | |
| IEEE 802.3ab 1000Base-T Gigabit Ethernet Copper | |
| IEEE 802.3af PoE | |
| Interface | |
| Ethernet Port |
2 x 10/100/1000MBase-T RJ45, Auto Negotiation, Auto-MDI/MDIX, Plug-n-Play, Bridge/Router mode |
| System LED |
SYS: Power On: Green ON, System Ready: OFF |
| Reset |
System Reset(2~6 Seconds) / Default Settings Reset(over 7 Seconds) |
| Power Requirement | |
| Power Input | Ethernet-WAN/PD: 802.3at/af compliance PD(48-57VDC) Input or Passive 48V Input (Default Attached injector) *Warming: Do not use default passive 48V PoE injector to power on other devices. Not sure whether the 3rd party device can compatible with it or not. |
| Power Consumption | Max. 18W full traffic, suggest to reserve 15% tolerance |
| WLAN Properties | |
| Processor |
Dual-Core ARM A53 1.3GHz CPU |
| Standard |
IEEE 802.11ax/ac/n/a 5GHz and IEEE 802.11ax/n/g/b 2.4GGHz, also known as Wi-Fi 6 |
| Frequency |
ISM Band, |
| Operation Channel |
Channel Bandwidth: 20MHz, 40MHz, 80MHz, 160MHz |
| Data Rate | 802.11ax 5GHz: MCS0 ~ MCS11 max. 2402Mbps(160MHz)/1200Mbps(80MHz), 802.11ax 2.4GHz: MCS0 ~ 9, max. 574Mbps, 802.11ac 5GHz: MCS0 ~ 9, max. 866Mbps, 802.11n 2.4GHz: MCS0 ~ 7, max. 300Mbps 802.11a 5GHz/11g 2.4GHz: max. 54Mbps |
| MU-MIMO |
2.4G 2T2R/5GHz 2T2R Downlink & Uplink MU-MIMO DBDC (Dual Band Dual Concurrent) |
| Max. E.I.R.P. |
≦20db(2.4GHz) /≦23db(5GHz), compliant with EU CE regulatory requirements for 2.4G/5G bands |
| Antenna | WAC835G-OMN: Built-in 2x5dbi 2.4GHz+2x6dbi 5GHz Antennas WAC835G-DSA: Built-in 4x 8dbi 2.4G/5GHz Antennas |
| Software | |
| Device Management | WebGUI, Quick Setup Wizard, Dashboard-like Device info in webGUI, IPv4, DHCP server/client, Backup/Restore the configuration, Reset to Factory Default, Reboot, Periodic Auto Reboot, Admin Password Modification, Firmware GUI upgrade, System Log, DDNS, PPPoE Client |
| Network Mode | AP(Ethernet-Bridge), Gateway(Ethernet-Router), Repeater mode(Ethernet-Bridge) |
| Wireless Function |
WLAN Basic Settings: Radio on/off, Wireless AP/Client mode, 802.11ax/ac/n/g/b mode, Band and Frequency selection, SSID/Multi-SSID(VAP) configuration, up to 8xSSID (4 for 2.4G, 4 for 5G), SSID broadcast(SSID Hidden), RF power adjustable, Wireless client isolation, 802.11k/v(enabled by default), 802.11r(future release), user quantity limit, max 64 users to access each band |
| Security | IEEE 802.1X/RADIUS, TLS v1.2, HTTPs/SSH, First login password management AP Security: Share Key, WPA/WPA2-PSK(Pre-Shared Key), WPA/WPA2 Enterprise, WPA3-PSK Encryption: 64/128-bit WEP(Wired Equivalent Privacy), TKIP(WPA-PSK, WPA3-PSK), AES(WPA2-PSK, WPA3-PSK) |
| Time Management | NTP, Wi-Fi Time on/off to save energy |
| WAN/Routing/NAT/Firewall | NAT, DMZ, IP Filter, MAC Filter , Port Forwarding, URL Filtering |
| AP Controller Management | Fit AP mode for AC Controller management Use WAC1500-100U Series AP Controller *Future release. |
| Mechanical | |
| Installation |
Wall-/Pole- Mount |
| Enclosure Material | Plastic ABS |
| Dimension |
181 x 304 x 88 mm(W x H x D) / without mounting accessory |
| Ingress Protection | IP66 |
| Weight |
1.6kg |
| Environmental | |
| Operating Temperature & Humidity | -20°C~55°C 5%~95% Non- Condensing |
| Storage Temperature | -40°C~85°C |
| MTBF | >200,000 hours at 40º full cycle |
| Warranty | 1 year |
| Approval | |
| CE |
CE RED Compliance
|
| FCC |
Part 15B |
| Model Name | Description |
| WAC835G-OMN-EU | Waterproof 2.4G+5GHz WLAN6 11ax 3000M Wireless Access Point, IP66, 5/6dbi Omni-Ant, GbE 802.3at PD, 48V_Injector-EU |
| WAC835G-OMN-US | Waterproof 2.4G+5GHz WLAN6 11ax 3000M Wireless Access Point, IP66, 5/6dbi Omni-Ant, GbE 802.3at PD, 48V_Injector-US |
| WAC835G-DSA-EU | Waterproof 2.4G+5GHz WiFi 6 11ax 3000M Wireless Access Point, IP66, 8dbi 120° Ant, GbE 802.3at PD, 48V_Injector-EU |
| WAC835G-DSA-US | Waterproof 2.4G+5GHz WiFi 6 11ax 3000M Wireless Access Point, IP66, 8dbi 120° Ant, GbE 802.3at PD, 48V_Injector-US |
| Package List | |
| Product Unit (with built-in antenna) | |
| Quick Installation Guide | |
| Passive PoE Injector & Power cord | |
| Pole Mounting Kit and cable gland connector |